|
Oxygen- Air Bomb Test Chamber
|
For test Rubber Cables & Rubber Product As Per ASTM and IS Standards
Introduction
The equipment is designed to meet the requirement of national and international standards to conduct accelerated aging before conducting Tensile Test for breaking and elongation.
The environment of the pressurized vessel an elevated temperature in an atmosphere of pressurized oxygen / air. the equipment is designed according to following standards
IS 10810 (Part 56) - 1987
ASTM D 572 - 1988
IS 3400 (Part 4) - 1987
Technical Specifications
� INTERNAL SIZE OF PRESSURE CHAMBER : 150 mm X 302 mm OR As per requirement.
� MAXIMUM WORKING PRESSURE : up to 23 kg/cm� (2.3 Mpa)
� SAFETY VALVE SETTING : 30 kg/cm� (3.5 Mpa)
� OPERATING TEMPERATURE : 5�C above ambient temperature to 150�C.
� CONTROL SYSTEM : PID Controller.
|
|
