Cord guard Flexing test designed as per IS: 302, IS:366, IS:1293, IEC60884 and all the international standards For guards which do not comply with the dimensional requirement of this clause, a sample of the guard, together with the cable or cord delivered with the appliance, is to be subjected to 5000 cycles of flexing. The guard is mounted in the appliance with 60cm to 100cm length of cord. With the appliance held stationary, the guard is flexed by moving the cord back and forth in a plane through an angle of approximately 90 degree and 180 degree. At the end of the test, The guard and the cord shall slow no unusual signs of abrasion or wear.
With standard weights
With 6 digit preset counter